Putting an item in your cart does not guarantee its purchase. Products remain in stock until checkout has been completed.
(Advanced Personal Vaporizer System)
The CyBorg APVS is a
modular APV system that allows users to configure and tailor their APV
according to their personal preferences or current needs quickly and easily.
Optional parts and
Modules will allow the CyBorg to change and expand over time. This way, as new
advancements come to market, the CyBorg can adopt them with ease.
The CyBorg C3 consists of:
(1) SS flat top cap with sprung center contact for flush mounting of atomizers.
(1) DNA30 module
(1) SS telescopic battery tube will accept 18350/18490/18650
(1) SS fixed bottom cap
(mechanical bottom button optional to transform into a fully mechanical mod)
The CyBorg utilizes
eVic/eGo 18650 Mod Threads. This allows the use of all the various battery
tubes, bottom caps, control heads that are on the market now and in the future
for these devices. We are seeing other devices coming out utilizing these
threads and our goal is to make the CyBorg as versatile as possible.
The CyBorg Top-Cap also utilizes these
same threads which allow the CyBorg to do something completely unique. With the
use of the optional CyBorg bottom button, you can remove the Top-Cap, remove
the DNA Module, and screw the Top-Cap directly into the battery tube which transforms
the device into a Fully-Mechanical PV!
WILL NOT ACCEPT FLAT TOP CELLS! BUTTON TOP ONLY!
WE RECOMMEND THIS BATTERY: http://www.fluidvaper.com/ORB25
This protects against reverse polarity shorting.
A single cell rechargeable lithium chemistry battery is recommended. Either a lithium ion or a lithium polymer type can be used. Any battery used should be rated for a MINIMUM of 10 amps continuous discharge current. High C rated lithium polymer or IMR cylindrical cells are strongly preferred.
Insert battery + (positive) toward control head of the CyBorg.
Device diameter: 23mm
DNA30 Module length: 47mm
Telescopic tube length:
Screen window- 8mm X 20mm
The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It
features a small OLED display, analog or digital user controls, onboard buttons and synchronous
rectification for maximum battery life and minimal heat generation.
Minimum Typical Max
Output Power 7 Watts 30 Watts
Output Voltage 4 Volts 8.3 Volts
Output Current 10 Amps
Atomizer Resistance .5 Ohms 1.5 Ohms 3.0 Ohms
Input Voltage 3.2 Volts 3.7 Volts 4.3 Volts
Input Current 1.5 Amps 6.0 Amps 12 Amps
Screen On Current 25mA
Quiescent Current 1 mA
Power Down Current 30 uA
Footprint .65” x 1.30”
Screen size .69” OLED
Watt setting: The power level currently set on the DNA 30D.
Battery indicator: The current state of charge of the battery.
Volts display: The output voltage being supplied to the atomizer.
Ohms display: The resistance of the atomizer attached to the device. This is measured only when the
unit is supplying power to the atomizer. At other times, it shows the most recent measurement.
Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause
the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not
adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show
“Locked, Click 5X”. To exit Locked mode, press the fire button 5 times.
Stealth mode: While locked, holding the fire and down buttons simultaneously for five seconds will
switch to stealth mode. In this mode the display is off. It will still show error and lock messages. To
switch back to normal display mode, hold down the fire and down buttons simultaneously for 5 seconds.
This setting is stored to internal flash memory, and remains if power is removed.
Right Mode and Left Mode: While locked, holding the fire and up buttons simultaneously for 5 seconds
flips the display. This allows for maximum flexibility in designing the mod, as well as accommodating left
handed use. This setting is stored to internal flash memory, and remains if power is removed. If using a
potentiometer, this option can be set before soldering the potentiometer on during manufacture.
Power Locked mode: Holding down both the up and down buttons for two seconds will place the device
in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change
the power setting. This mode prevents accidental power level changes due to the buttons being pressed
while in a pocket. To exit Power Locked mode, hold the up and down buttons for two seconds. Error Messages
The DNA 30 will indicate a variety of error states.
Check Atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer
resistance is incorrect for the power setting.
Shorted: The atomizer or wiring are short circuited.
Check Battery: The battery is below 3.1 volts. It probably needs to be charged.
Weak Battery: The battery sags excessively when firing. This typically means the user is not using a high
rate battery, or the battery is old and degraded. It can also mean the battery is not making good contact.
Too Hot: The DNA 30D has onboard temperature sensing. It will shut down and display this message if
the internal board temperature becomes excessive.
Too low power setting: The DNA 30D puts out a minimum of 4 volts. With low power settings (7 to 8
watts) and low resistance atomizers (below 2 ohms) the DNA will sometimes be unable to provide a low
enough power output to be power regulating. If this is the case, the Ohms display will be flashing. The
device will still operate.
Device resets: If the battery is not able to power the device at the desired setting, or the battery is
excessively discharged, the device may go immediately into a low voltage shutdown. If firing the device
causes the screen to blank out and then display the welcome screen, you should charge, replace or
upgrade your battery. This is especially common at power settings above 20 watts.
Auto power down
The screen will be at full brightness while firing. After 15 seconds with no button presses, the screen will
dim. 2 minutes after the last button press, the screen will fade out and the device will go to sleep mode.
Pressing any button will turn the device and display back on. Pinout
The DNA 30D has onboard switches for adjusting the power level and